AORE H Series High-Performance Sheet Laser

Production sheet laser with automatic sheet changeover

AORE

Sheet size 3000 mm to 6000 mm
Laser power 6 kW to 40 kW
200 m/min, up to 4 G

The H Series is AORE's high-volume production sheet laser: a fully enclosed fibre cutter aimed at shops where cycle time is what decides the job's margin. Available from 6 kW through to 40 kW across three bed sizes, with a sheet exchange platform as standard so the next sheet is loading while the current one is still cutting.

Where the S Series is about precision in a small footprint, the H Series is about throughput. Peak traverse of 200 m/min with 4G acceleration on the H3015 means far less time spent on rapid moves between cuts, and that gap widens the more small parts there are in the nest.

Get a quote

Key features

200 m/min traverse, up to 4 G acceleration

4 G applies to the H3015; the larger H4020 and H6020 run at 2.8 G. On a nest of small parts the head spends most of its time accelerating and decelerating, so acceleration governs cycle time more than cutting speed does.

6 to 40 kW fibre source

Power is specified at order across a 6 to 40 kW range, matched to the thickness and material you cut most. High-speed drives and motion control are matched to the source so the machine holds accuracy at full traverse.

High-rigidity structure with anti-burn design

Running at 4 G loads the gantry, and heat from high-power cutting moves steel. The frame is reinforced to limit thermal deformation, holding positioning accuracy at 0.03 mm through a shift rather than only from cold.

Sheet exchange platform

The next sheet is loaded on the second platform while the current one is being cut. The machine is not standing idle waiting on a forklift, which across two shifts is a substantial amount of recovered cutting time.

Intelligent nesting and automatic focus

Nesting and focus adjustment are handled by the control rather than set by the operator. Real-time monitoring tracks cutting condition and machine state through the job.

Full enclosure, interlocked doors, zoned extraction

The cabinet contains the beam and the fume, and opening a door stops the machine. Extraction runs by zone rather than across the whole bed, which improves capture at the cut and reduces power draw and filter load on a 40 kW machine running all day.

Specifications

Model	H3015	H4020	H6020
Power	6 to 40 kW	6 to 40 kW	6 to 40 kW
Processing format	3060 x 1550 mm	4060 x 2050 mm	6150 x 2050 mm
Maximum speed	200 m/min	200 m/min	200 m/min
Maximum acceleration	4 G	2.8 G	2.8 G
Positioning accuracy	0.03 mm	0.03 mm	0.03 mm
Table	Sheet exchange platform	Sheet exchange platform	Sheet exchange platform
Enclosure	Full, interlocked doors	Full, interlocked doors	Full, interlocked doors
Extraction	Zoned, follows the head	Zoned, follows the head	Zoned, follows the head

Specifications are indicative and subject to change by the manufacturer without notice. Please confirm any figure critical to your application before ordering.