AORE H-ALS Series Automated Profile Loading and Unloading System
Automated profile loading and unloading for tube laser lines
- Section size 300 x 150 mm to 800 x 500 mm
- Profile length up to 12 m
- Load capacity 5 t
The H-ALS is an automated loading and unloading system that feeds structural profiles to a tube laser and removes finished parts. It handles sections from 300 x 150 mm to 800 x 500 mm in lengths to 12 m, with a loading capacity of 5 t.
Two stations operate alternately: one is loaded while the other is under the laser. Operator involvement is limited to supervision rather than material handling at either end of the machine.
Key features
Fully enclosed guarding
A full enclosure separates the operator from the working area during operation. Loading and cutting continue without personnel inside the guarded zone, and the enclosure is supplied to Australian workplace safety requirements.
3D vision positioning
A 3D vision scanner locates each profile before pickup and corrects for position and alignment. Sections are presented to the laser without manual setting.
Magnetic pickup
Profiles are lifted by magnetic pickup rather than mechanical clamping. A range of section shapes is handled with the same gripper and material surfaces are not marked.
Pneumatic width adjustment
Support width is set pneumatically to the section in production. The profile is carried correctly through the cut without manual adjustment between section sizes.
Dual station exchange
Two stations operate in alternation, with one loaded while the other is under the laser. Waiting time for material at the cutting head is reduced.
Linked loading and unloading
Loading and unloading alternate between the two stations under a single control. Finished parts are cleared as the next section is presented, without a separate unloading cycle.
Specifications
| Model | H-ALS |
| Power | 12–40 kW |
| Section Size for Profile Processing | 300 × 150 mm – 800 × 500 mm |
| Max. Length of Profile | 12000 mm |
| Max. Loading Capacity | 5 T |
| Max. X/Y-Axis Linkage Positioning Speed | 80 m/min |
| Max. X/Y-Axis Linkage Positioning Acceleration | 0.8 G |
Specifications are indicative and subject to change by the manufacturer without notice. Please confirm any figure critical to your application before ordering.
Video
Installed and Supported in Australia
IMS imports direct from the factory and looks after the machine from delivery on.
- Installation and commissioning by IMS technicians
- Operator training on site
- Guarding to Australian workplace safety requirements
- Spare parts and consumables held in Australia
- Service and breakdown support from factory-trained technicians
About AORE
Fibre laser systems from one of China's largest laser manufacturers, backed by local support across Australia and New Zealand.
Official Australia and New Zealand agent for AORE high-power fibre laser cutting systems.
View all AORE machines →
