AORE CELL Series 3D Five-Axis Laser Cutting Cell
Fully enclosed 3D five-axis laser cutting cell with twin-station rotary table
- Working travel 3100 x 2200 x 680 mm
- 360° rotation, ±135° swing
- 140 m/min, 1 G
The CELL Series is a fully enclosed five-axis laser cutting cell for holes, contours and trimmed edges on pressed, formed and fabricated components. The CELL3122 has a working travel of 3100 x 2200 x 680 mm, positioning accuracy of ±0.03 mm and cutting speeds to 140 m/min.
A twin-station rotary table changes over in three seconds or less, so one part is loaded while the other is cut. Several manual trimming and drilling operations are replaced by one programmed process.
Key features
High-rigidity welded gantry bed
Overhead gantry with a main body integrally welded from high-strength steel plate. Rigidity and dynamic stability are maintained under high-load cutting at 1 G acceleration.
Five-axis simultaneous cutting head
A 3D cutting head with built-in optical path supports five-axis simultaneous movement, with continuous 360° rotation and ±135° swing. Complex curved surfaces and special-shaped components are cut without repositioning the part.
Twin-station rotary table
A dual-station rotary table changes stations in three seconds or less with positioning accuracy of ±15 arc seconds. Loading and unloading run concurrently with cutting, roughly doubling throughput against a single-station cell.
Full enclosure, dual light curtains and dust extraction
A fully enclosed cover with upper and lower safety light curtains separates the operator from the cutting zone, and a press-down, draw-below dual extraction system removes cutting fume at source. The enclosure is supplied to Australian workplace safety requirements as standard.
Automatic focus to material thickness
The head adjusts focal position automatically to material thickness and holds focus continuously through the cut. Cut quality is consistent across carbon steel, stainless, aluminium and formed components within one program.
Got formed parts you are still trimming by hand?
Five-axis cutting is specified where pressed or formed components require the same holes and trimmed edges in volume. The cell is configured from part drawings and annual quantities at quotation.
Talk to a laser specialistSpecifications
| Model | CELL3122 |
| Working travel (L x W x H) | 3100 x 2200 x 680 mm |
| Positioning accuracy | ±0.03 mm |
| A-axis travel | ±135° |
| C-axis travel | n x 360°, continuous |
| Maximum speed | 140 m/min |
| Maximum acceleration | 1 G |
| Stations | Twin rotary table, station change in 3 s or less |
The CELL3122 is the standard configuration. Fixturing is designed per component family and quick-change plates are specified where mixed parts are run; robot loading is available where volume justifies it.
Specifications are indicative and subject to change by the manufacturer without notice. Please confirm any figure critical to your application before ordering.
Video
Installed and Supported in Australia
IMS imports direct from the factory and looks after the machine from delivery on.
- Installation and commissioning by IMS technicians
- Operator training on site
- Guarding to Australian workplace safety requirements
- Spare parts and consumables held in Australia
- Service and breakdown support from factory-trained technicians
About AORE
Fibre laser systems from one of China's largest laser manufacturers, backed by local support across Australia and New Zealand.
Official Australia and New Zealand agent for AORE high-power fibre laser cutting systems.
View all AORE machines →